RTS DKP 16 CLD User Manual Download Page 111

Page: 111 / 232

KP32CLD

KP 32 CLD Menu System 101

Bosch Security Systems, Inc.

User Manual

F.01U.193.294

Rev. 10

Display Menu, Version

Version

displays the firmware version currently running on the keypanel.

NOTE:

For firmware upgrades, contact customer service. The KP 32 CLD firmware can be upgraded through AZedit.

display the firmware version currently loaded on the keypanel

, do the following:

On the KP 32 CLD keypad, press

MENU



The Top Level menu appears

Verify

Display

is selected.

Press the

SEL

button.



The Display submenu appears

Using the 3(



) or 6(



), select

Version

Press the

SEL

button.



The Version display appears showing firmware version for the keypanel.

Summary of Contents for DKP 16 CLD









































































































































































































































Search results

Summary of Contents for DKP 16 CLD

Reviews:

Related manuals for DKP 16 CLD

Brands by name

Popular brands

RTS DKP 16 CLD, User Manual

Search results

Summary of Contents for DKP 16 CLD

Reviews:

Related manuals for DKP 16 CLD

Brands by name

Popular brands