RTS DKP 16 CLD, User Manual

Page: 214 / 232

204 KP32CLD
Bosch Security Systems, Inc. User Manual F.01U.193.294 Rev. 10
set channel desc Allows you to edit the channel description (up to 63 characters ).
set channel dest_ip Allows you to edit the destination IP Address the RVON-2 card communicates with
set channel dest_type Allows you to edit the destination type for the device the RVON-2 card talks with
set channel dest_chan Allows you to edit the destination channel of the device the RVON-2 talks with
set channel chan_codec
Allows you to edit the CODEC to be used for transferring the data between the two (2)
devices
set channel vad_threshold Allows you to edit the vad threshold for the channel.
set channel input_gain Allows you to edit the input gain for the RVON-2 card
set channel output_gain Allows you to edit the output gain for the RVON-2 card.
set the channel onhook
onhook = hang up
If the channel was already connected, going offhook has no effect (it is already offhook if
connected). Going onhook hangs up the call, and it should then try to reconnect.
If the channel was not already connected, going offhook causes it to try and establish a
connection. Going onhook in this state has no effect (it is already onhook if idle.
set channel offhook
offhook = connected
If the channel was already connected, going offhook has no effect (it is already offhook if
connected). Going onhook hangs up the call, and it should then try to reconnect.
If the channel was not already connected, going offhook causes it to try and establish a
connection. Going onhook in this state has no effect (it is already onhook).