RTS DKP 16 CLD User Manual Download Page 198

Page: 198 / 232

188

KP32CLD

Bosch Security Systems, Inc.

User Manual

F.01U.193.294

Rev. 10

Using a screwdriver, connect the

RVON-2 ground strap

using the specified screw shown in to the corner ground

post in the KP 32 CLD.

Insert the

bottom edge

of the RVON-2 Option Card in the KP 32 CLD unit.

Carefully tilt the

top edge

of the RVON-2 option card to be flush with the KP 32 CLD unit.

Line up the

screw holes of the RVON-2 option card

with the screw holes on the KP 32 CLD unit.

Using a screwdriver,

replace the screws

, securing the RVON-2 Option Card in place.

Power

the KP 32 CLD unit.

Summary of Contents for DKP 16 CLD









































































































































































































































Search results

Summary of Contents for DKP 16 CLD

Reviews:

Related manuals for DKP 16 CLD

Brands by name

Popular brands

RTS DKP 16 CLD, User Manual

Search results

Summary of Contents for DKP 16 CLD

Reviews:

Related manuals for DKP 16 CLD

Brands by name

Popular brands