RTS DKP 16 CLD User Manual Download Page 42

Page: 42 / 232

32 Basic Operation

KP32CLD

Bosch Security Systems, Inc.

User Manual

F.01U.193.294

Rev. 10

Aux Volume Adjustments

By default, the

Aux Volume

control adjusts the listen volume for the listen source, which includes Aux 1-Aux-6, option card

Channel 1, Channel 2, and Matrix IN.

Aux Volume and RVON-2 ranges from

+10dB to -48dB and Mute

adjust listen volume level

, do the following:

On the KP 32 CLD, turn the

AUX VOLUME encoder

to the right to increase the volume for the listen source.



Turn the

AUX VOLUME encoder

to the left to decrease the volume for the listen source.

NOTE:

When the AUX VOLUME encoder is turned, the volume level bar appears in the display window.

NOTE:

•

You can save the volume adjustments to be power-up defaults using “Menu System, Save Config” on
page 123.

•

The listen source appears in the Aux Volume menu if they are enabled or present. For more information,
see “Service Menu, Aux/Mtx Inputs” on page 126.

Summary of Contents for DKP 16 CLD









































































































































































































































Search results

Summary of Contents for DKP 16 CLD

Reviews:

Related manuals for DKP 16 CLD

Brands by name

Popular brands

RTS DKP 16 CLD, User Manual

Search results

Summary of Contents for DKP 16 CLD

Reviews:

Related manuals for DKP 16 CLD

Brands by name

Popular brands