RTS DKP 16 CLD User Manual Download Page 204

Page: 204 / 232

194

KP32CLD

Bosch Security Systems, Inc.

User Manual

F.01U.193.294

Rev. 10

14.

Using the 3 (



) or 6 (



), select

Netmask

15.

Press

SEL



The current Netmask appears

16.

Using the number pad, enter the

first number

in the Netmask.



This activates the first octet of the Netmask and clears the rest of the Netmask

17.

Press

SEL



This confirms the first octet in the Netmask and moves you to the second octet

NOTE:

Press

SEL

to skip over any octet that does not need modification.

18.

Repeat

steps

and

until the entire Netmask is entered.

19.

Press

SEL



IP Address, Gateway, and Netmask appear in the display window

NOTE:

Once you have entered the Gateway, enter the Netmask, if required. The Netmask is a string of numbers

similar to an IP Address, except that it masks or screens out the network part of an IP Address so that
only the host computer part of the address remains (for example, 255.255.255.0).

20.

Press

SEL



The current Netmask appears

21.

Using the number pad, enter the

first number

in the Netmask Address.



This activates the first octet of the Netmask Address and clears the rest of the address

22.

Press

SEL



This confirms the first octet in the Netmask Address and moves you to the second octet

NOTE:

Press

SEL

to skip over any octet that does not need modification.

23.

Repeat

steps

and

until the entire Netmask is entered.

24.

Press

SEL



IP Address, Gateway, and Netmask appear in the display window.

25.

Press

CLR

to exit the menu.



The modifications are now made

NOTE:

You can still set the IP Address without being connected to an Ethernet LAN. Once you have entered the IP

information you are prompted to perform a Save Cfg. The address is saved in the keypanel until the RVON-
2 is connected to an Ethernet LAN.

Summary of Contents for DKP 16 CLD









































































































































































































































Search results

Summary of Contents for DKP 16 CLD

Reviews:

Related manuals for DKP 16 CLD

Brands by name

Popular brands

RTS DKP 16 CLD, User Manual

Search results

Summary of Contents for DKP 16 CLD

Reviews:

Related manuals for DKP 16 CLD

Brands by name

Popular brands