RTS DKP 16 CLD, User Manual

Page: 136 / 232

126 KP 32 CLD Menu System KP32CLD
Bosch Security Systems, Inc. User Manual F.01U.193.294 Rev. 10
To set the character size and keypanel language , do the following:
1.
On the KP 32 CLD keypad, press MENU .

The Top Level menu appears .
2.
Using the 3(

) or 6(

), select Service .
3.
Press the SEL button.

The Service submenu appears in the display window.
4.
Using the 3(

) or 6(

), select Alphas .
5.
Press the SEL button.

4 Chars, 6 Chars, 8 Chars, and 8 Chars (Unicode) appear in the display window .
6.
Using the 3(

) or 6(

), select Alpha Size .
7.
Press the SEL button.

Japanese and Standard appear in the display window.
8.
Using the 3(

) or 6(

), select the Language .
9.
Press the SEL button.

Cancel and Save and Restart appear in the display window.
10.
Using the 3(

) or 6(

), select Save and Restart .
11.
Press the SEL button.

The keypanel restarts itself .
Service Menu, Aux/Mtx Inputs
Aux/Mtx Inputs enables or disables the control for audio input through the front panel encoder. The KP 32 CLD has six(6)
Aux Input connectors on the back panel of the unit. See the “KP 32 CLD Block Diagram” on page 5.
By default, Matrix In is enabled .
NOTE: This feature is only enabled if the GPI 32 CLD option card is installed.
NOTE: There are only three (3) Aux Inputs available on the DKP 16 CLD.
To enable/disable the aux/mtx inputs , do the following:
1.
On the KP 32 CLD keypad, press MENU .

The Top Level menu appears .
2.
Using the 3(

) or 6(

), select Service .