RTS DKP 16 CLD User Manual Download Page 40

Page: 40 / 232

30 Basic Operation

KP32CLD

Bosch Security Systems, Inc.

User Manual

F.01U.193.294

Rev. 10

Key Gain Adjustment

The

Key Gain Adjustment

is used to change the crosspoint listen gain on a specific key from the Matrix. This adjustment is

automatically reflected in AZedit on the Crosspoint Gains window. (System|Gains|Crosspoint).

The range for this feature is

-80dB

+6dB

, and

Mute

NOTE:

A listen assignment must be configured for key gain to be enabled on a keypanel key.

change key volumes

, do the following:

On the KP 32 CLD front panel

•

Press the

keypanel key

to the right to increase the listen gain for the selected key assignment.

•

Press the

keypanel key

to the left to decrease the listen gain for the selected key assignment.



A volume status bar (

) and the volume level, in dB, appear on the specified key in the display

window.

Summary of Contents for DKP 16 CLD









































































































































































































































Search results

Summary of Contents for DKP 16 CLD

Reviews:

Related manuals for DKP 16 CLD

Brands by name

Popular brands

RTS DKP 16 CLD, User Manual

Search results

Summary of Contents for DKP 16 CLD

Reviews:

Related manuals for DKP 16 CLD

Brands by name

Popular brands