manualshive.com logo in svg

RTS DBP 4F, Technical Manual, Page: 87 / 98

Share
Download
RTS DBP 4F Technical Manual Download Page 87

DBP Digital Beltpack

Menu Structure | en

87

Bosch Security Systems, LLC

Technical Manual

2021-06 | 01 | F.01U.380.825

3.

Rotate either 

shaft encoder

 to scroll through the options.

i

Notice!

As you switch between the different modes, the Brightness bar graph changes to show the
brightness level for that mode. You can edit the brightness of the mode by selecting the mode
and then modifying the brightness of the selected mode in the Brightness menu item.

4.

Press the 

SEL/MENU button

 to confirm the selection.

9.16.2

Brightness

Use the 

Brightness

 menu item to adjust the brightness for the currently selected display

mode. Adjustments to the brightness appear in increments of two, from 0% to 100%.

To 

set the brightness

, do the following:

1.

Navigate to the 

Brightness menu item

 (Display | Brightness).

2.

Press the 

SEL/MENU button

.

The field becomes active.

3.

Rotate either 

shaft encoder

 to increase or decrease the display brightness.

4.

Press the 

SEL/MENU button

 to confirm the change, or press the 

CLR/BACK button

 to

abort changes.

Summary of Contents for DBP 4F



































































































Reviews:

No comments