
12
en | Cabling
DBP Digital Beltpack
2021-06 | 01 | F.01U.380.825
Technical Manual
Bosch Security Systems, LLC
For information on connecting the DBP to the OMS, see
Configure OMS to make a connection
4.2
To OMI
To
cable a DBP to an OMI card
, do the following:
1.
Using a CAT-5e cable, attach
one end to the PoE IN connector
on the DBP.
2.
Connect the
other end of the cable
to an approved PoE switch.
3.
Using a second CAT-5e cable, connect
one end to the approved PoE switch
.
4.
Connect the other end to an Ethernet connector on the OMI card.
SERIAL
J5
J2
J1
ETHERNET
OMI-2 BC
J3
J4
PoE Switch
For information on connecting the DBP to the OMI card, see
Configure an OMI card to make a
4.3
To ODIN
To
connect the DBP to an ODIN matrix
, do the following:
1.
Using a CAT-5e cable, attach
one end to the PoE IN connector
on the DBP.
2.
Connect the
other end of the cable
to an approved PoE switch.
Summary of Contents for DBP 4F
Page 1: ...DBP Digital Beltpack DBP 4M DBP 4F DBP 5F en Technical Manual...
Page 2: ......
Page 97: ......