22
en | Create an Intercom connection
DBP Digital Beltpack
2021-06 | 01 | F.01U.380.825
Technical Manual
Bosch Security Systems, LLC
2.
Expand the
tree
to view the destination devices available.
3.
Select the
desired device
for the destination.
4.
Click
OK
.
The screen closes.
5.
Select the
channel
to which the device connects.
i
Notice!
Be sure to configure the DBP channel to the configured ODIN channel. For example, if ODIN
channel 5 is configured for DBP channel 1, then DBP channel 1 should be configured to ODIN
channel 5.
6.
(Optional) Enter the
channel description
.
Using the Device Configuration Pane
1.
(Optional) Enter a
description
for the device.
2.
Send the
changes
to the device.
6.5
Create connections using AZedit
6.5.1
Configure OMS/ODIN to make a connection offer
Ethernet configuration must be done before an OMNEO channel connection is made.
To
configure an OMS/ODIN to make a connection offer
, do the following:
1.
On the KP screen, select the
port (2)
to configure the connection.
i
Notice!
If configuring OMS to make connections, you must select an OMNEO port from the Port Alpha
fields (2).
2.
Click the
Edit button (1)
.
The Keypanel/Port Configuration screen opens.
Summary of Contents for DBP 4F
Page 1: ...DBP Digital Beltpack DBP 4M DBP 4F DBP 5F en Technical Manual...
Page 2: ......
Page 97: ......