DBP Digital Beltpack
Create an Intercom connection | en
23
Bosch Security Systems, LLC
Technical Manual
2021-06 | 01 | F.01U.380.825
3.
Enter the
Device Name
of the device to which you want to connect. Use the browse
button to open the available devices screen to select a device.
The IP Address of the device automatically populates the IP Address field.
4.
Select the
Device Type
to which you want to connect.
5.
Select the
OMNEO channel
on which to communicate.
6.
Select the
Latency
of the connection.
i
Notice!
DBP supports a minimum latency of 2ms.
6.5.2
Configure an OMI card to make a connection offer
To
configure an OMI card to make a connection offer
, do the following:
1.
From the status menu in AZedit, select
I/O Cards
.
The I/O Card Status screen appears showing a list of installed cards.
2.
Right-click the desired
OMI card
.
3.
Select
OMNEO Configuration
.
The OMNEO Configuration screen appears.
Summary of Contents for DBP 4F
Page 1: ...DBP Digital Beltpack DBP 4M DBP 4F DBP 5F en Technical Manual...
Page 2: ......
Page 97: ......