RTS DBP 4F, Technical Manual, Page: 27 / 98

DBP Digital Beltpack Basic Operation | en 27
Bosch Security Systems, LLC
Technical Manual
2021-06 | 01 | F.01U.380.825
Bluetooth headset paired, present, and selected
Bluetooth headset paired, selected, not present
Bluetooth device, nothing paired
Bluetooth device paired, not present
Bluetooth device paired, present, not selected
Bluetooth device paired, present, and selected
Bluetooth device paired, selected, not present
New CWW entries are present
Existing CWW entries are present
Tab. 8.1: Display Status Icons
8.2 Navigation basics
There are five basic buttons to navigate through the Digital Belt Pack menu system.
A/C shaft encoder
1
Controls the master volume and by pressing the shaft
encoder, toggles the control to Key A or Key C listen
volume.
Scrolls through the menu items when in a menu or sub-
menu.
In most situations, pressing the A/C shaft encoder
button behaves the same as pressing the CLR/BACK
button. Some exceptions to this are when editing a
device name and when deleting a character.
Used to edit a menu item value/state in an active menu.
Exits the current menu item or aborts editing of the
highlighted menu item (applies to the shaft encoder as
a push button).
B/D shaft encoder
1
Controls the master volume and by pressing the shaft
encoder, toggles the control to Key B or Key D listen
volume.
Controls Key B and Key D volume.
Scrolls through the menu items when in a menu or sub-
menu.
In most situations, pressing the B/D shaft encoder
button behaves the same as pressing the SEL/MENU
button. Some exceptions to this are when editing a
device name and when inserting a character.