50
en | Menu Structure
DBP Digital Beltpack
2021-06 | 01 | F.01U.380.825
Technical Manual
Bosch Security Systems, LLC
i
Notice!
Navigation between octets is automatic depending on which way you rotate the shaft
encoder. Rotating the encoder counterclockwise expands the address range, while rotating
the encoder clockwise shrinks the address range.
3.
Rotate either shaft encoder
clockwise to expand the address range
or
counterclockwise
to shrink the address range
.
Once the current octet reaches 255, the focus moves to the next octet.
4.
Press the
SEL/MENU button
to confirm the change, or press the
CLR/BACK button
to
abort changes.
i
Notice!
Changes to this menu result in a device reboot.
9.1.5
Gateway
Use the
Gateway
menu item to configure the gateway address for the belt pack.
Validation on address fields occur when you try to save them. If an address is invalid, an error
prompt displays.
i
Notice!
Modifications to this field are allowed only when DHCP is disabled.
To
configure the gateway address
, do the following:
1.
Navigate to the
Gateway menu item
(Setup | Network | Gateway).
2.
Press the
SEL/MENU button
.
The first octet highlights.
Summary of Contents for DBP 4F
Page 1: ...DBP Digital Beltpack DBP 4M DBP 4F DBP 5F en Technical Manual...
Page 2: ......
Page 97: ......