RTS DBP 4F, Technical Manual, Page: 84 / 98

84 en | Menu Structure DBP Digital Beltpack
2021-06 | 01 | F.01U.380.825
Technical Manual
Bosch Security Systems, LLC
5. Rotate either shaft encoder to select Connect or Disconnect.
6. Press the SEL/MENU button to initiate the action.
A Connecting progress bar appears on the screen. When it finishes the connection, a
Completed message appears on the screen. The connection attempt can also fail
sometimes and shows a red failed message. If this occurs, attempt the connection again.
If disconnecting, a popup window appears with a Disconnected message.
To unpair a Bluetooth headset , do the following:
1. Navigate to the Paired Headsets menu item (Bluetooth | Paired Headsets).
2. Press the SEL/MENU button .
The field is active if Bluetooth devices are available, otherwise the menu item does not
activate.
3. Rotate either shaft encoder to scroll through available devices.
4. Press the SEL/MENU button to confirm.
A popup window appears.
5. Rotate either shaft encoder to select Unpair.
6. Press the SEL/MENU button to confirm the unpairing.
A popup window appears with an Unpaired message.
9.15.3 Paired Aux Devs
The Paired Aux Devs menu item contains a list of phone or other aux devices previously
paired to the DBP. Use this menu item to connect, disconnect, and unpair Bluetooth enabled
devices for use with the belt pack.