DBP Digital Beltpack
Create an Intercom connection | en
17
Bosch Security Systems, LLC
Technical Manual
2021-06 | 01 | F.01U.380.825
i
Notice!
If you are connecting a DBP or Keypanel in order to power it up on this port, choose Channel
1. Any other port is an Aux port and the DBP has only two channels.
1.
Enter the
device name
of the partner device to connect to this port.
2.
Select the
type
of partner device.
3.
Select the
channel number
on the partner device to connect to.
4.
(Optional) Change the
Rx Latency
for the connection.
The default is recommended.
5.
When finished, press
ENC1
to exit.
6.
Choose
Save
to save the changes.
6.2.2
Configure ODIN to make a connection offer
i
Notice!
For more information, see the ODIN manual found at www.rtsintercoms.com
To
connect a DBP to an ODIN
, do the following:
1.
Navigate to the
OMNEO icon
.
2.
Click the
right encoder knob
.
The OMNEO Channels screen displays.
i
Notice!
If the intercom system contains only one ODIN frame, the Frame field is not displayed. If the
intercom system contains multiple ODIN frames, the Frame field activates and allows ports in
other frames to be selected and configured. While the Frame field is highlighted, press the
right encoder knob to activate the field. Once activated, turn the right encoder knob to select
another frame in the system.
3.
Navigate to the
Port field
.
4.
Click the
right encoder knob
.
The Port field becomes active.
5.
Scroll to the
desired port
.
6.
Navigate to the
Device Name field
.
7.
Enter the
device name of the partner device
to connect to this port.
8.
Navigate to the
Device Type field
.
9.
Scroll to the
OMNEO device type
of the partner device.
10. Navigate to the
channel field
.
11. Scroll to the
desired channel
on the partner device.
12. (Optional) Enter a
description
for this connection.
Summary of Contents for DBP 4F
Page 1: ...DBP Digital Beltpack DBP 4M DBP 4F DBP 5F en Technical Manual...
Page 2: ......
Page 97: ......