DBP Digital Beltpack
Menu Structure | en
53
Bosch Security Systems, LLC
Technical Manual
2021-06 | 01 | F.01U.380.825
i
Notice!
If you press and hold the A/C shaft encoder, the highlighted character turns red, and then
deletes after a couple of seconds. If you release the encoder while it is red, but before it
deletes, then nothing happens. If you press and release the shaft encoder quickly, then it
behaves like the CLR button and aborts the edit.
Similarly, if you press and hold the B/D shaft encoder, the highlighted character turns white,
and a new character inserts after a couple of seconds. If you release the encoder while it is
white, before inserting a new character, then nothing happens. If you press and release the
shaft encoder quickly, then it behaves like the SEL/MENU button and saves your edits.
5.
Press the
SEL/MENU button
to confirm the change, or press the
CLR/BACK button
to
abort changes.
9.1.8
MAC Address
Use the
MAC Address
menu item to view the MAC address of the digital belt pack. The MAC
address field is not editable.
To
display the MAC address
, do the following:
4
Navigate to the
MAC Address menu item
(Setup | Network | MAC Address).
The MAC Address is read only.
9.2
Setup | Offers
9.2.1
DBP Offers
Use the
DBP Offers
menu item to select and accept connection offers from the intercom. DBP
offers determine which port on which intercom the DBP is connected as a belt pack and its
alpha.
To
accept a DBP Offer
, do the following:
1.
Navigate to
the DBP Offers menu item
(Setup | Offers | DBP Offers).
2.
Press the
SEL/MENU button
.
The field becomes active.
3.
Rotate either
shaft encoder
to scroll through the available offers.
Summary of Contents for DBP 4F
Page 1: ...DBP Digital Beltpack DBP 4M DBP 4F DBP 5F en Technical Manual...
Page 2: ......
Page 97: ......