
8
en | Introduction
DBP Digital Beltpack
2021-06 | 01 | F.01U.380.825
Technical Manual
Bosch Security Systems, LLC
2
Introduction
The
DBP
(Digital Belt Pack) is one of RTS' initial offerings in the wired digital party line
solution space. The DBP provides two modes in which the DBP can operate for up to four
configurable audio conferences. There are two modes DBP can operate,
KP
(Keypanel) mode
and
PL
(Party Line) mode. When connected to an intercom in KP mode, any key assignment
that is made to a keypanel can be made on the DBP. When connected to an OMS, the
assignment types are limited to PL,
RY
(relays), and
UR
(UPL resources).
When connected to the
OMS
(OMNEO Main Station), the DBP operates as a digital party line
device. The DBP also connects to any of the RTS matrix products directly via OMNEO. This
includes OMI cards in ADAM (or ADAM -M) frames or OMNEO ports on ODIN frames. When
connected to an RTS OMNEO matrix, the DBP acts as a wired, 4-button keypanel. The DBP
automatically determines the correct mode of operation (digital party line connection to OMS
or keypanel connection to the matrix) at power on.
The DBP recovers power over an 802.3af or 802.3at compliant Ethernet interface. The PoE
(power over Ethernet) In port connects to a PoE compliant power sourcing equipment. The
PoE Out port is available for daisy chain connections to other DBPs.
The DBP comes in a rugged, over-molded enclosure that is IP-53 compliant. It has a full-color
TFT display and an icon-based menu interface, which allows for local configuration of essential
customer preferences.
2.1
Features
–
Incorporates both XLR and 3.5 mm TRRS connectors for headsets, and the XLR headsets
are available in 3 different headset XLR options: 4-pin female, 4-pin male, and 5-pin
female. The 5-pin female headset supports stereo audio.
–
PoE powered via an 802.3af or 802.3at managed switch or PoE injector. Contains a PoE
In and PoE Out port, which allows up to six DBPs to be daisy-chain connected to the
same PoE (+) switch port.
–
DBP connects to an OMNEO main station (Digital Party Line) or an OMNEO capable
matrix (OMI card or ODIN). DBP can support up to four active Party Lines. 40 DBPs can
be connected to OMS (based on model), 64 DBPs can be connected to one OMI card
(based on model, 128 DBPs can be connected to one ODIN, based on model).
–
Supports Bluetooth audio connectivity using either an IO Gear GBU522 dongle or an LM
Technologies LM506 dongle.
–
Incoming CALL notifications via audible alerts or haptic vibration.
Summary of Contents for DBP 4F
Page 1: ...DBP Digital Beltpack DBP 4M DBP 4F DBP 5F en Technical Manual...
Page 2: ......
Page 97: ......