RTS DBP 4F, Technical Manual, Page: 30 / 98

30 en | Basic Operation DBP Digital Beltpack
2021-06 | 01 | F.01U.380.825
Technical Manual
Bosch Security Systems, LLC
Receiving an
incoming call
signal:
Pressing the TALK key
cancels the CALL beep
and vibration. If the TALK key is on, it stays on when you
release the TALK button.
If the TALK key is not on, it turns on and stays
on if you let go within the latching period.
MENU mode:
Press and release the
CLR/BACK button with
menu highlighted Go back one level (exits the MENU if at the
top level).
Press and release the
CLR/BACK button with
widget highlighted Aborts all changes made and moves the
highlight back to the menu
Press and hold the CLR/
BACK button Exits the menu structure (aborts any widget
change in process)
Press and release the
MENU/SEL key (with a
menu item highlighted) Invokes the highlighted menu item (may go to
a lower-level menu, or activate the widget
associated with the highlighted menu item).
Press and release the
MENU/SEL key (with a
widget highlighted) Deactivates the widget (moves highlight back
to menu item) and saves the current widget
state (as current operating mode)
Press the A/C shaft
encoder button Go back one level (exits the MENU if at the
top level).
Behaves the same as the CLR/BACK button in
most situations.
Press the B/D shaft
encoder button Invokes the highlighted menu item (may go to
a lower-level menu, or activate the widget
associated with the highlighted menu item).
Behaves the same as the SEL/MENU button in
most situations.
Rotating either shaft
encoder (with a menu
item highlighted) Moves the menu item highlight to the next or
previous menu item.
Rotating either shaft
encoder (with a widget
highlighted) Adjusts/edits the data represented by the
widget.
For many widget types, A/C shaft encoder and
B/D shaft encoder are treated the same.
For example, adjusting a gain or brightness, or
selecting a value in a spin control, or changing
the state of an binary or tri-state widget, can
all be done by rotating either shaft encoder