manualshive.com logo in svg

RTS DBP 4F, Technical Manual, Page: 37 / 98

Share
Download
RTS DBP 4F Technical Manual Download Page 37

DBP Digital Beltpack

Basic Operation | en

37

Bosch Security Systems, LLC

Technical Manual

2021-06 | 01 | F.01U.380.825

8.9

Bluetooth

The DBP supports Bluetooth technology allowing connections to Bluetooth enabled devices, if
desired. To use Bluetooth on the DBP, the device must have an approved Bluetooth dongle
installed. For more information, see 

Install the Bluetooth dongle, page 15. The Bluetooth menu

item appears grey when the dongle is not present in the device.

Figure 8.1: 

Bluetooth dongle not installed

When the dongle is present, the icon turns blue and access to the menu is granted.

Figure 8.2: 

Bluetooth dongle installed

For instructions on how to pair and connect the Bluetooth device, see 

Bluetooth, page 81

8.9.1

Answer a phone call via Bluetooth

To 

answer a phone call via Bluetooth

, do the following:

When a call comes into the belt pack via a Bluetooth device, a popup notification appears.

Summary of Contents for DBP 4F



































































































Reviews:

No comments