RTS DBP 4F, Technical Manual, Page: 49 / 98

DBP Digital Beltpack Menu Structure | en 49
Bosch Security Systems, LLC
Technical Manual
2021-06 | 01 | F.01U.380.825
2. Press the SEL/MENU button .
The first octet highlights.
3. Rotate the B/D shaft encoder to make changes.
OR
Rotate the
A/C shaft encoder to move to the next octet.
4. Repeat step 3 until the address is complete.
5. Press the SEL/MENU button to confirm the change, or press the CLR/BACK button to
abort changes.
i
Notice!
Changes to this menu result in a device reboot.
9.1.4 Netmask
Use the Netmask menu item to configure or change the Netmask address. Netmask addressing
subdivides a network, and in turn alleviates heavy network traffic in large systems.
Validation on address fields occur when you try to save them. If an address is invalid, an error
prompt displays.
i
Notice!
Modifications to this field are allowed only when DHCP is disabled.
To configure the Netmask , do the following:
1. Navigate to the Netmask menu item (Setup | Network | Netmask).
2. Press the SEL/MENU button .
The first octet that is not 255 highlights.