48
en | Menu Structure
DBP Digital Beltpack
2021-06 | 01 | F.01U.380.825
Technical Manual
Bosch Security Systems, LLC
i
Notice!
If you press and hold the A/C shaft encoder, the highlighted character turns red, and then
deletes after a couple of seconds. If you release the encoder while it is red, but before it
deletes, then nothing happens. If you press and release the shaft encoder quickly, then it
behaves like the CLR button and aborts the edit.
Similarly, if you press and hold the B/D shaft encoder, the highlighted character turns white,
and a new character inserts after a couple of seconds. If you release the encoder while it is
white, before inserting a new character, then nothing happens. If you press and release the
shaft encoder quickly, then it behaves like the SEL/MENU button and saves your edits.
5.
Press the
SEL/MENU button
to confirm the change, or press the
CLR/BACK button
to
abort changes.
9.1.2
DHCP
Use the
DHCP
menu item to enable or disable DHCP on the belt pack.
To
enable or disable DHCP
, do the following:
1.
Navigate to the
DHCP menu item
(Setup|Network|DHCP).
2.
Press the
SEL/MENU button
.
3.
Rotate either
shaft encoder
to toggle between options.
4.
Press the
SEL/MENU button
to confirm the change, or press the
CLR/BACK button
to
abort changes.
9.1.3
IP Address
Use the
IP Address
menu item to configure the IP Address for the belt pack.
Validation on address fields occur when you try to save them. If an address is invalid, an error
prompt displays.
i
Notice!
Modifications to this field are allowed only when DHCP is disabled.
To
configure the IP Address
, do the following:
1.
Navigate to the
IP Address menu item
(Setup | Network | IP Address).
Summary of Contents for DBP 4F
Page 1: ...DBP Digital Beltpack DBP 4M DBP 4F DBP 5F en Technical Manual...
Page 2: ......
Page 97: ......