Roxell Vitoo In Line, Use And Assembly Manual

Page: 78 / 106

ROXELL - 008-0512 VITOO IN LINE -- INSTALLATION INSTRUCTIONS
III--24
TO INSTALL THE FEEDER LINE
100kg hopper.
FIGURE 43.
Put the tubes with the pans on the floor. Expanded ends pointed towards the 100kg hopper.
Connect the tubes : push each tube as far as possible into the socket of the next tube.
ATTENTION : All holes pointing straight downwards ! (Welding seams upside).
Make a row at the spot where you will suspend the tubes.
Expanded end
TO INSTALL THE INTAKE BOOT
FIGURE 44. FIGURE 45.
FEEDER LINE SUSPENSION
FIGURE 46.
Start suspension from the central winch. Proceed to both ends until the preparation of the suspension is finished.
1
2 5
2
3
3
4
4
5
6
Fix the suspension cable as follows :
TO START, SUSPEND ALL CABLES
UNDER SLIGHT TENSION.
1