Roxell Vitoo In Line, Use And Assembly Manual

Page: 69 / 106

ROXELL - 008- 4403 VITOO IN LINE -- INSTALLATION INSTRUCTIONS
III--15
CENTRAL WINCH INSTALLATION
IMPORTANT : INSTALL WINCH ABOUT IN THE MIDDLE, AT THE FIRST FIXATION IN THE
DIRECTION OF THE 100KG HOPPER*, NOT AT THE END OF A LINE ! MAXIMUM LIFTING POW-
ER : 800KGS.
THE TRACTION OF THE WINCH IS 800 KG. INSTALL THE WINCH AT A SOLID SPOT IN THE ROOF
CONSTRUCTION. REINFORCE WHEN NECESSARY.
FIGURE 27.
Roxell suppliesthe hand operated winch withoutmount-
ing plate and bolts/nuts.
Fix the winch directly to a SOLID CEILING.
If you want to use a mounting plate : see drawing.
You can install plate & winch in any direction.
(7
1
/
2
”)
3
3
/
4
”
= HAND OPERATED CENTRAL WINCH.
CORRECT
Fix the winch to the plate with bolts and locknuts.
Fix this plate to the ceilings before the insulation. Pay attention to the correct direction.
FIGURE 28.
= CENTRAL WINCH W/GEARBOX (MOTOR OPERATED), sup-
plied with MOUNTING PLATE.
Install the motor after finishing the installation.
Winching up speed :
1m/minute.
WRONG