Roxell Vitoo In Line, Use And Assembly Manual

Page: 15 / 106

ROXELL - 008 - 3911 VITOO IN LINE -- INSTRUCTIONS FOR THE USER
I--9
-
Now the system runs at full capacity and birds
all will receive the same amount of feed.
- Adjust the feed level ring in the right position.
See page I--4
In order to prevent feed waste and to obtain a comfortable
eating position for the breeders it is important to adjust the
height of the line according to the development of the
birds.
Extra advantages of the correct height of the system are an easy
passage for the birds and less risk of having floor eggs.
Take care that the pans are perfectly level !
Always make sure that the back of the birds is 2--3
cm higher than the side of the pan.
FIGURE 10.
CLEANING AND MAINTENANCE.
-- At the end of the rearing period, empty the COMPLETE
system.
At the last meal, consider the amount of feed in the tubes
(450--500gr./0,75m ).
Winch up the system completely to remove the birds and
the manure from the house.
NEVER STAY UNDERNEATH WHEN
LOWERING OR WINCHING UP THE
LINES. STOP IMMEDIATELY AT THE
SLIGHTEST HITCH.
-- If you use heavy objects or machines when emptying the
house, you must avoid any damage to the system.
-- Winch up the lines to a working height of about 1m for easy
cleaning.
-- To remove the pan : release the grill from the pan at the
5 clips by hand or by means of the special tool supplied in
the correct order :
FIGURE 11.
1
2
Order
2
By hand
FIGURE 12.
Pull the lip to the outside with one hand (1). Push the
pan downward with the other hand.
1
Take the grill in both hands at the height of the arrows
and open the grill. The pan loosens completely from
the grill.
FIGURE 13.
FIGURE 14.
Let the pan rest on the
floor, so that it stays
stable and at its place!
-- Now the pans can easily be cleaned one after another with
a high pressure cleaner.
-- Push the pan back into the grill and click the 5 clips one
after another over the pan edge.
-- If you want to replace a complete pan :