
ROXELL - 008-0512
VITOO IN LINE -- INSTALLATION INSTRUCTIONS
III--14
SUSPENSION FOR FEEDER LINE
MAKE SURE THAT THE CABLE 3/16” DOES NOT HANG IN, BUT BESIDE THE SCREW HOOKS
AND PULLEYS !
Hang a SMALL PULLEY on each SCREW HOOK.
Slide a piece of CABLE 3/32” through each pulley ( towards the central winch)
Fix this cable at 15cm from the pulley to the main cable 3/16” with a cable clamp.
CABLE CLAMP
MAIN CABLE
CENTRAL
WINCH
FIGURE 23.
FIGURE 24.
Determine the length of cable to be cut as follows :
-- pull the cable downward under slight tension until it
touches the tube.
-- Add 10cm.
-- Cut here.
Start suspension from the central winch. Proceed to both ends until the preparation of the suspension is finished.
1
FIGURE 25.
You will not get any differences in level along the line as long as you respect
the distances at the first two cable attachments.
Cable
Feeder line.
25cm
15cm
25cm
25cm
25cm
15cm
15cm
15cm
0cm
0cm
If lifting height is more than 3m, you can install the central winch somewhat out of line. So the pulleys will not touch the
cable clamps. (Alternative system : see Fig. 26.)
Wooden beam.
Beam
Suspension cord
Main cable 5mm
Screw hook with pulley.
If H more than
3m.
(L = 3M)
FIGURE 26.
H
If winching--up height (H) exceeds 3m, place suspension hooks crosswise off the beam center line. So the cable clamps
will not touch the pulleys when you wind up the line.
(Max. 3,5M)
Summary of Contents for Vitoo In Line
