Rottler F103 Series, Installation Manual, Operation And Maintenance Manual

Page: 60 / 318

Section 4 Control Definitions F103/4/5A Manual
www.rottlermfg.com
4-6
Std (Standard) Setup
Pressing this button will insert all the Rottler operations into the right hand section automatically.
Use the slide bar on the right hand side to scroll through all the operations.
Options
Press this button to bring up a dialog box to allow positive numbers to be entered in the horizontal stops.
Most all programs are from left to right, the farther right you go the larger the negative number. However
if a different zero point is used a positive number may be needed. For example, if you zero on the first
cylinder on the left bank of a block and then “roll it over” the first cylinder is farther to the right than the
zero position. Which would be a positive number.