Rottler F103 Series, Installation Manual, Operation And Maintenance Manual

Page: 73 / 318

Section 4 Control Definitions F103/4/5A Manual
www.rottlermfg.com
4-19
Assigning Tools
From the Set Zero Tab, select Probe#. This will open the Tools Select Form. Select Tool 1, 50 mm
Probe and click OK.
Select the Tool#.
This will open The Tool Select Form. Select Tool 2, 10 inch Fly Cutter and click OK.
The tools to be used have now been assigned to the program.
Left Deck Probe
Enter the positions you want the Probe to probe here. You can physically move the probe to the locations
on the bank you want to probe and hit the set button also.
Right Deck Probe
Roll the block over to the Right Bank. Enter the positions you want the Probe to probe here. You can
Physically move the probe to the locations on the bank you want to probe and hit the set button also.
Auto Probing
Press the Start Probing button. The machine will first probe each programmed location on the left bank
and record the height. The spindle will move to Vertical Clearance height and the block will roll over to
the right bank and probe the programmed locations and record them. If you have a 4th axis The block
will then roll back over to the Left bank and the spindle will move to the first Left location and stop.