Ross Carbonite Ultra Series, User Manual

Page: 57 / 202

Tip: You can import a switcher set from your local
computer in the Import Set to Frame area. Click Import
From... and navigate to the folder where the set is stored
and click Open. It may take several minutes for the set to
upload to the switcher.
3. Click an Available Set button to select the
set you want to load the switcher register
from. If there is only one set on the USB then
these buttons will not be present.
4. Click a Load button to load that register.
Only those registers that are present in the
set are shown.
•
All — recall all registers from the set.
• Memories — recall only the memory
registers from the set.
• Customs — recall only the custom
control registers from the set.
• Installation — recall only the installation
registers from the set.
• Personality — recall only the personality
registers from the set.
5. Click Yes .
Ultra User Manual (v6.6) — Switcher Sets • 57