Ross Carbonite Ultra Series, User Manual

Page: 146 / 202

Description Location Event
Move a fader stripe left or right on the mix layer in the RAVE audio mixer.
1.
Click Channel Position.
2. Click the InnerAudioMixerOutput button and select the mixer output
that you want to send the command to.
3. Click the InnerAudioMixerChannel button and select the channel you
want to send the command to.
4. Click an Action button to move the stripe to the left of the layer (Up) or
to the right (Down).
Audio Mixer > Config Channel Position
Audio Mixer (Device)
Description Location Event
Set the pan level for the selected channel on the selected device.
1.
Click Audio Pan.
2. Click the Audio Mixer button and select the device you want to send the
command to.
3. Click the Channel button and select the channel you want to send the
command to.
4. Click the Change Type button and select whether you want to set
(Absolute) or reset (Reset) the parameter. Some selections will not be
available when you reset the parameter.
5. Enter the new pan level in the Pan Left/Right (%) field.
Devices > Audio Mixer Audio Mixer Pan
Set the level for the selected channel on the selected device.
1.
Click Audio Volume.
2. Click the Audio Mixer button and select the device you want to send the
command to.
3. Click the Channel button and select the channel you want to send the
command to.
4. Click the Change Type button and select whether you want to set
(Absolute) or reset (Reset) the parameter. Some selections will not be
available when you reset the parameter.
5. Enter the new audio level in the Volume (%) field.
Devices > Audio Mixer Audio Mixer Volume
Camera
Description Location Event
Send the halt command to the selected camera.
1.
Click Camera Halt All.
2. Click the Camera button and select the device you want to send the
command to.
Devices > Camera Robotic Camera — Halt
All
Recall a shot on the selected camera at the rate/speed set in the shot.
1.
Click Recall Shot.
2. Click the Camera button and select the device you want to send the
command to.
3. Click the Channel button and select the channel you want to send the
command to.
4. Click the Change Type button and select whether you want to set
(Absolute) or reset (Reset) the parameter. Some selections will not be
available when you reset the parameter.
5. Enter the shot number you want to recall from in the Shot field.
Devices > Camera Robotic Camera —
Recall Shot
146 • Custom Control Events — Ultra User Manual (v6.6)