Ross Carbonite Ultra Series, User Manual

Page: 166 / 202

Description Location Event
Reset the selected timer.
1.
Click the Timer Reset button and select the timer you want to reset.
MultiViewer > Clock >
Countdown Timer
Reset
MultiViewer Clock —
Countdown Timer
Reset
Select whether
FSFC
is shown on the label on the selected MultiViewer when
a source has an FSFC applies to it.
1.
Click a MultiViewer button to select which MultiViewer you want to
perform the event on.
2. Click the Change Type button and select whether you want to set
(Absolute) or reset (Reset) the parameter. Some selections will not be
available when you reset the parameter.
3. Click a Value button to select whether FSFC is shown on the label (On)
or not (Off).
MultiViewer > MV FSFC
Label
MultiViewer — FSFC
Label
Select a layout for the selected MultiViewer.
1.
Click a MultiViewer button to select which MultiViewer you want to
perform the event on.
2. Click the Layout button and select the layout you want to use.
MultiViewer > MV
Layout
MultiViewer — Layout
Select how the tallies are shown on the selected MultiViewer.
1.
Click a MultiViewer button to select which MultiViewer you want to
perform the event on.
2. Click a Tally Display button to select whether tallies are shown as a
border around the box (Box), as boxes on either side of the label (Label),
or as boxes on either side of the label but swapped (Label Reverse).
MultiViewer > MV Tally
Display
MultiViewer — Tally
Display
PBus II
Description Location Event
Recall a register on the selected PBus device.
1.
Click PBus Recall Register.
2. Click the PBus button and select the device you want to send the
command to.
3. Click the Device button and select the channel you want to send the
command to.
4. Click the Change Type button and select whether you want to set
(Absolute) or reset (Reset) the parameter. Some selections will not be
available when you reset the parameter.
5. Enter number of the register you want to recall in the Register field.
Devices > PBus PBus — Recall
Trigger a function on the selected PBus device.
1.
Click PBus Trigger Function.
2. Click the PBus button and select the device you want to send the
command to.
3. Click the Device button and select the channel you want to send the
command to.
4. Click the Change Type button and select whether you want to set
(Absolute) or reset (Reset) the parameter. Some selections will not be
available when you reset the parameter.
5. Enter the number of the function you want to trigger in the Function
field.
Devices > PBus PBus — Trigger
166 • Custom Control Events — Ultra User Manual (v6.6)