Rosemount 3107 Reference Manual Download Page 132

Page: 132 / 148

122

Reference Manual

00809-0200-4840, Rev BA

Appendix B: Product Certifications

December 2014

Appendix B: Product Certifications

B.2

Approved manufacturing locations

Rosemount Inc.
– Chanhassen, Minnesota, USA

Rosemount Measurement Limited
– Slough, Berkshire, United Kingdom

Emerson Process Management Asia Pacific Private Limited
– Singapore

B.3

European Union directive information

Note



Refer to the housing label to identify the approvals for your transmitter.

The EC declaration of conformity for all applicable European directives for this product can be
found on the Rosemount web site at www.rosemount.com.
A hard copy may be obtained by contacting our local sales representative.

ATEX directive (94/9/EC)



Emerson Process Management complies with the ATEX Directive

Pressure equipment directive (PED) (97/23/EC)



The 3107 and 3108 are outside the scope of PED Directive

Electro magnetic compatibility (EMC) (2004/108/EC)



EN 61326-1:2006

B.4

MCERTS certification

MCERTS certificate number (3108 only)



Sira Certificate No. MC080131

B.5

Hazardous locations certifications

Note



Refer to the housing label to identify the approvals for your transmitter.

B.5.1

American and canadian approvals

Factory Mutual (FM) approval

FM Intrinsic Safety

Intrinsically Safe for Class I, Division 1, Groups A, B, C, and D

Zone Marking: Class I, Zone 0, AEx ia llC

Temperature Code T6 (T

= 55 °C)

Temperature Code T4 (T

= 60 °C)

Summary of Contents for 3107





















































































































































Search results

Summary of Contents for 3107

Reviews:

Related manuals for 3107

Brands by name

Popular brands

Rosemount 3107, Reference Manual

Search results

Summary of Contents for 3107

Reviews:

Related manuals for 3107

Brands by name

Popular brands