manualshive.com logo in svg

Rosemount Analytical 880A, Instruction Manual

Share
Download
Rosemount Analytical 880A Instruction Manual Download Page 37

I

NITIAL 

S

TARTUP AND 

C

ALIBRATION

3-8

 October 1999          Rosemount Analytical          748250-L

Model 880A Non-Dispersive Infrared Analyzer

RUN MODE

Other screen displays now accessible.
Two (2) minutes of keyboard inactivity
restores  secured status, requiring re-
entry of password.

SECURITY

PASSWORD: ???

ENTER

SECURITY

PASSWORD: ???

ENTER

ENTER

SHIFT

Toggles

ON/OFF

A. ACCESSING SECURED SCREEN DISPLAYS.

B.  ACTIVATING/DE-ACTIVATING SECURITY FEATURES AND CHANGING PASSWORD.

Note:

←

   SECURITY Activated

→

  

SECURITY De-Activated

If SECURITY is activated, follow procedure A above, first.

          and            will move cursor right/left, one character at a time.              and            will go to next function.

          and            will return analyzer to RUN MODE.                                     and            will change (toggle) settings.

SHIFT

SHIFT

ENTER

SECURITY: OFF

ENTER

“DATA STORED”

SHIFT

NEW PSWRD: ???

ENTER

PSWRD IS NOW XXX

SHIFT

RUN MODE

Select three characters.
Valid characters are
“space”, 0 through 9
and A through Z.

F

IGURE 

3-5.  S

ECURITY 

M

ODE

3.6  RANGE PARAMETERS

3.6.1  R

ANGE 

S

ELECTION

See Figure 3-6.  There are several range parameters that may be changed. The first
display [RANGE: # CMP NNN  

→

]  allows RANGE 1, RANGE 2 or RANGE 3 to be

selected with the 

↑

 or 

↓

: key. Of these three independent ranges, RANGE 3 should

always be the least sensitive range (highest fullscale range).

Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com

Summary of Contents for 880A

























































































Reviews:

No comments

Brands by name

Popular brands

Load more brands