Galaxy Raid GHDX4 SAS<>-SAS/SATA 12Bay
Installation / Hardware Reference Manual
2-20
Mounting Hole Locations
Step 3.
Secure the disk drive with four (4) of the supplied 6/32
flat-head screws.
Step 4.
Once the hard drives are installed into drive trays,
install all drive trays into the enclosure. See detailed
instructions in the following section.
2.9
Drive Tray Installation
Once the hard drives have been secured within the drive trays, the
drive trays can be installed into the system.
WARNING!
All drive trays must be installed into the enclosure even if they do
not contain a hard drive. If there are empty drive bays, the
ventilation airflow will be disrupted and the system will overheat.
Step 1.
Use a small-size, 1/8”, flat-blade screwdriver to turn
the rotary bezel lock to the unlocked position
, i.e.,
the groove on its face is in a horizontal orientation.
Front Bezel Rotary Lock
Step 2.
Open the front bezel on the drive tray.
Push the
release button on the drive tray. The front bezel will
spring open.
