Chapter 2: Hardware Installation
2-11
NOTE:
Screws for securing chassis to the front rack posts are provided in the
system’s
accessory box
. There are 4 M5 x35mm, 4 M6 x35mm, and 4 #10-32
31.75mm screws.
Rackmount Rail Components
Installation Pre-requisites
•
One (1) medium-size and one (1) small-size cross-head
screwdrivers
•
One (1) medium-size flat-head screwdriver
•
Because the RAID system can weigh 17 kilograms without hard
disk drives, two (2) people are required to rack-mount the
enclosure.
CAUTION!
The hard drives and drive trays should only be installed into the
system after the system has been mounted into a rack cabinet. If
the hard drives are installed first, the system will be too heavy to
handle and the possible impact during installation may damage your
drives.
Rack-mounting Steps
