Galaxy Raid GHDX4 SAS<>-SAS/SATA 12Bay
Installation / Hardware Reference Manual
2-10
2.5.1
Preinstalled Components
The following components have been installed at the factory and do
not need to be installed:
1 - Backplane board
1 - DDRII DIMM module
2 - PSU modules
1 - LCD keypad panel
2 - Cooling fan modules
2.5.2 Modules to be Installed
You must install the following components:
Rackmount rails (if purchased)
Cache backup module (optional)
RAID controller
Hard drives / Drive trays
Cables
2.6
Rack/Cabinet Installation
The system is designed to fit into a variety of 19-inch rack cabinets or
racks. Make sure you have an appropriate site location and cables
prepared with adequate lengths to connect to power source and other
devices.
When installing the system into a rack or cabinet it is advisable that
two (2) people assist in the mounting process.
Package Contents
The rackmount rail kit should include the following components:
Item
Description
Quantity
01
Mounting bracket assembly, L-shape, left-side
1
02
Mounting bracket assembly, L-shape, right-side
1
03
Inner glide
2
04
Flange filler plate (fixed behind chassis ears)
2
05
Cross recess truss head screws M5 x 9.0mm
8
06
#6-32 x10mm flathead screws
4
07
#6-32 L6 flathead screws
6
08
M5 cage nuts
4
