Galaxy Raid Installation and Hardware Reference Manual
xi
•
To comply with safety, emission, or thermal requirements, none of the
covers or replaceable modules should be removed. Make sure that all
enclosure modules and covers are securely in place during operation.
•
Be sure that the rack cabinet into which the subsystem chassis will be
installed provides sufficient ventilation channels and airflow circulation
around the subsystem.
•
Provide a soft, clean surface to place your subsystem on before working
on it. Servicing on a rough surface may damage the exterior of the
chassis.
•
If it is necessary to transport the subsystem, repackage all drives
separately.
•
Dual-redundant controller models come with two RAID controllers that
should always be present. Single-controller models come with a single
RAID controller and a metal sheet is placed over the lower controller bay
at the rear of the subsystem. Since single-controller models cannot be
upgraded, this metal sheet should NEVER be removed.
ESD Precautions
Observe all conventional anti-ESD methods while handling system
modules. The use of a grounded wrist strap and an anti-static work
pad are recommended. Avoid dust and debris in your work area.
About This Manual
This manual:
Introduces the Galaxy storage system series.
Describes all major components in the system.
Provides recommendations and details about the hardware
installation process.
Describes how to monitor system operating statuses.
Describes how to maintain the subsystem.
This manual does not:
Describe components that are not user-serviceable.
