CONTINUE ADJ.?
YES [DONE]
13.
Press [ENTER] to confirm your entry.
• If you select "YES", proceed to the next procedure.
• If you select "DONE", proceed to step
4.Save the settings as a preset.(P. 85)
14.
Press [
▲
] or [
▼
] to adjust the blade force.
• If the two shapes are peeled off together → increase the blade force.
• If the backing paper is also cut → reduce the blade force.
CUT FORCE
50gf 60gf
15.
Press [ENTER] to confirm your entry.
The test pattern is cut again. Check the result.
16.
Check how the two shapes peel off.
• Two shapes are peeled off together/backing paper is also cut
Press [
◀
] to select "YES".
CONTINUE ADJ.?
[YES] DONE
• Two shapes are peeled off separately
Press [
▶
] to select "DONE".
CONTINUE ADJ.?
YES [DONE]
17.
Press [ENTER] to confirm your entry.
• If you select "YES", the test pattern is cut again. Go back to step 12 and perform the setting again.
• If you select "DONE", proceed to step
4.Save the settings as a preset.(P. 85)
Cutting Output
84
2. Cutting Method
Summary of Contents for TrueVIS VG2-540
