Roland TrueVIS VG2-540 User Manual Download Page 30

Page: 30 / 319

Sleep Mode (Power-saving Feature)

This machine is provided with a power-saving feature that switches to a low-power "sleep mode" when a fixed

interval passes with no operation. The factory default for the time after which the machine switches to sleep

mode is 30 minutes. When the machine is in the sleep mode, the sub power switch flashes slowly. Using the oper-

ation panel or performing operations such as sending print data from the computer restores the machine to its

normal mode.
This sleep mode setting can be changed. However, we recommend setting the activation time for sleep mode to 30

minutes or less to reduce power consumption and prevent problems such as overheating.

RELATED LINKS

・

P. 211 "Setting the Activation Interval for Sleep Mode (Power-saving Feature)"

Power Supply Operations

2. Basic Operations

Summary of Contents for TrueVIS VG2-540
































































































































































































































































































































Search results

Summary of Contents for TrueVIS VG2-540

Reviews:

Brands by name

Popular brands

Roland TrueVIS VG2-540, User Manual

Search results

Summary of Contents for TrueVIS VG2-540

Reviews:

Brands by name

Popular brands