Performing
Adjusting the Sound to Your Taste
The HPi-50e lets you add reverberation or modify the brightness of the sound.
Adding Reverberation to the Sound (Ambience)/Adjusting the Brightness of the Sound
(Brilliance)
You can add a pleasant reverberation to the sounds of the HPi-50e, producing the impression that you are performing in a concert hall. This effect is
called “Ambience.”
3
2
4
1
1.
Press the [Ambience/Brilliance] button .
The [Ambience/Brilliance] button will light, and the ambience/brilliance screen will appear.
2.
Use the cursor [
] [
] buttons to select either “ambience” or “brilliance .”
3.
Use the cursor [
] [
] buttons to adjust the depth of the effect .
Item
Value
Explanation
Ambience
0–10
Higher values apply deeper ambience.
* If you’re using headphones and the Headphones 3D Ambience effect (p. 54) is set to “On,” this lets you
adjust the depth of the Headphones 3D Ambience effect.
Brilliance
1–10
Positive (+) values make the sound brighter; negative (-) values make the sound more mellow.
4.
To turn off ambience and brilliance, press the [Ambience/Brilliance] button once again .
The [Ambience/Brilliance] button will go out.
MEMO
The on/off settings for ambience and brilliance will switch simultaneously.
24
