Roland Atelier AT-90SL Owner'S Manual Download

Page: 128 / 266

127

Chapter 5 Applying Various Effects to the Sound

■

Rotary Color

This setting allows you to choose the brightness of the Rotary
sound obtained when using the Rotary effect (p. 125).

Touch <Sound/Kbd> on the Main screen.

fig.05-08_50

The Sound/Keyboard screen appears.

Touch <Effect>.

The Effect screen appears.

fig.05-17_50

Touch <

> to display the Rotary Color.

Touch the value setting buttons for Rotary Color
to adjust the setting.

Each time you touch the Rotary Color setting, it will
switch between “BRIGHT” and “MELLOW.”

Settings

BRIGHT, MELLOW

Touch <Exit>.

These settings remain stored in memory even while the
power is off.

Min

Max

Min

Max

Min

Max

Min

Max

Harmony Intelligence

AT-90SL_e.book 127 ページ２００４年９月８日　水曜日　午後５時４４分

Summary of Contents for Atelier AT-90SL











































































































































































































































































Search results

Summary of Contents for Atelier AT-90SL

Reviews:

Related manuals for Atelier AT-90SL

Brands by name

Popular brands

Roland Atelier AT-90SL, Owner'S Manual

Search results

Summary of Contents for Atelier AT-90SL

Reviews:

Related manuals for Atelier AT-90SL

Brands by name

Popular brands