Roland Atelier AT-90SL Owner'S Manual Download

Page: 98 / 266

Chapter 3 Using the Registration Buttons

Touch <Save>.

The Registration Save screen appears.

fig.03-09_55

Touch <Utility>.

The Utility screen appears.

Touch <Format Disk>.

The Format Disk screen appears.

fig.

If you touch <Cancel>, you will return to the Registration Save screen
without formatting.

Touch <OK> to start formatting.

While formatting is in progress, the following display appears.

fig.

When the format is finished, the Registration Save screen returns.

NOTE

Never attempt to remove

the floppy disk until

formatting is complete.

Min

Max

Min

Max

Min

Max

Min

Max

Harmony Intelligence

AT-90SL_e.book 97 ページ２００４年９月８日　水曜日　午後５時４４分

Summary of Contents for Atelier AT-90SL











































































































































































































































































Search results

Summary of Contents for Atelier AT-90SL

Reviews:

Related manuals for Atelier AT-90SL

Brands by name

Popular brands

Roland Atelier AT-90SL, Owner'S Manual

Search results

Summary of Contents for Atelier AT-90SL

Reviews:

Related manuals for Atelier AT-90SL

Brands by name

Popular brands