Roland Atelier AT-90SL, Owner'S Manual

Page: 154 / 266

153
Chapter 7 Recording/Playing Back What You Play
Recording a Performance
You can record the performance that you play. You can also
record your performance while playing rhythms or
automatic accompaniment.
fig.07-12
1.
Select the panel settings needed for recording the
performance.
2.
Make sure that a floppy disk is not inserted in the
disk drive.
If a floppy disk is in the disk drive, press the Eject button
(p. 147) and remove the floppy disk.
3.
Enter the recording standby mode by pressing the
[Rec] button.
The [Rec] button indicator will light, and the [Play/Stop]
button will blink.
4.
Press the [Play/Stop] button to start recording.
When you press the [Play/Stop] button, the metronome
will play two measures (bars) of count-in before
recording begins.
If you wish to use Rhythm and Automatic Accompaniment
as you record, press the [Start/Stop] button instead of the
[Play/Stop] button to begin recording. Also, if the [Sync
Start] button is lit (i.e., if Sync Start is ON), recording will
begin the instant you play the Lower keyboard.
5.
Press the [Play/Stop] button when you have
completed your recording.
The Track indicator where a performance song is
recorded will change from a flashing to a constant light.
When you press the [Intro/Ending] button (or [Start/
Stop] button) while recording a Rhythm performance or
Automatic Accompaniment, the Rhythm performance
and Automatic Accompaniment will stop. However, the
recording itself will continue. Press the [Play/Stop]
button to stop recording.
The Play and Stop functions can both be assigned to one of
the foot switches located on each side of the Expression Pedal
(p. 118).
You can also choose to cancel the metronome count-in before
recording starts (p. 193).
Caution
If you press the [Rec] button when a song has been selected
from the floppy disk, the selected song will be completely
loaded into the AT-90SL and the Composer will enter into
the recording standby mode. To record a new song, use the
following procedure.
1.
Press the [Rec] button to cancel recording
standby.
2.
Take the floppy disk out of the disk drive.
3.
Delete the performance data (p. 157).
4.
Press the [Rec] button.
fig.07-12-2
If the following screen appears
fig.E-61
When the instrument’s memory is nearing capacity.
fig.E-30
When recording was automatically canceled because the
memory limit was reached.
Registration Song
Composer
Reset
Rec
Play / Stop
Demo
3 4, 5
Registration Song
Composer
Reset Rec Play / Stop
Demo
Min
Max
Min
Max
Min
Max
Min
Max
Harmony Intelligence
AT-90SL_e.book 153 ページ ２００４年９月８日 水曜日 午後５時４４分