Roland Atelier AT-90SL, Owner'S Manual

Page: 58 / 266

57
Chapter 1 Selecting and Playing Sounds
■
Changing Drums/SFX Sets
Immediately after the power is turned on, the POP drum set will sound.
As the drum set, you can choose the types of drum set and sound effect.
When you change the drum set, the sound produced by each note will
change.
1.
Press the [Drums/SFX] button, getting its indicator to light
up.
The Drums/SFX screen will be displayed for several seconds.
fig.01-33
2.
While the Drums/SFX screen is displayed, touch a Drum/SFX
set name in the screen.
The [Drums/SFX] button indicator will begin to blink.
You can select from 18 different Drum Sets and one set of Sound Effects as
follows:
POP, R&B, ROCK, JAZZ BRUSH, HIP HOP, VOX DRUM, STANDARD,
STANDARD2, ROOM, ROOM2, POWER, ELECTRONIC, TR-808,
DANCE, JAZZ, BRUSH, BRUSH2, ORCHESTRA, SOUND EFFECTS
3.
Press the [Drums/SFX] button once again.
The [Drums/SFX] button indicator will be lit constantly, and the selected
Drum Set Type will be applied.
For the types of drum set
and the sound effects
played by each key, refer to
“Drum/SFX Set List” (p.
223).
You can also confirm the
Drums/SFX set by
touching <Exit> in the
Drums/SFX screen.
You can also play the lower
manual to confirm the
drum set.
NOTE
After the Drums/SFX
(drums/sound effects)
screen is displayed, it will
close automatically after
several seconds unless you
touch the screen to select a
drums/sound effects set. If
you wish to switch drums/
sound effect sets, quickly
select the desired drums/
sound effect set while the
Drums/SFX (drums/
sound effects) screen is
displayed.
Min
Max
Min
Max
Min
Max
Min
Max
Harmony Intelligence
AT-90SL_e.book 57 ページ ２００４年９月８日 水曜日 午後５時４４分