background image

 

180

Chapter 9 Creating Original Accompaniment 
Rhythms

Editing the Sounds

 

You can add and erase sounds, alter voices, and change the 
velocity.

 

1.

 

Bring up the Rhythm Customize screen (p. 175).

 

2.

 

Touch the point on the screen where the sound 
you want to edit is located.

 

When you touch the screen, a line appears at the point 
you touch. By holding your finger to the screen and 
moving it to the left or right, you can have the line move 
along with your finger.

The information on the location (Measure: Beat: Tick) of 
the line on the screen is displayed.

When you remove your finger from the screen, the Note 
Edit screen opens, and the note positioned at the line in 
the Rhythm Customize screen is displayed.

 

You can touch <

> to open the Utility screen, and then 

touch <Note Edit> in the Utility screen to open the Note Edit 
screen.

 

Erasing Sounds

 

3.

 

Touch <

><

> to select the point 

where you want to delete the sound.

 

4.

 

When you touch <Erase>, the selected sound is 
erased.

 

Adding Sounds

 

5.

 

Touch <

><

> to select the point 

where you want to add the sound.

 

6.

 

When you touch <Create>, the new sound is 
added after the selected sound. 

Min

Max

Min

Max

Min

Max

Min

Max

Harmony Intelligence

AT-90SL_e.book 180 ページ 2004年9月8日 水曜日 午後5時44分

Summary of Contents for Atelier AT-90SL











































































































































































































































































Reviews: