205
Chapter 11 Connecting with External Device
Connecting to Audio
Equipment
When you connect the AT-90SL to audio equipment, you can
play the sounds from the AT-90SL through the speakers on
the audio equipment or record your performances on a tape
recorder or other recording device.
When connecting, please use an audio cable with a standard
phone plug, such as the PCS-100PW (sold separately). When
purchasing an audio cable, please consult the vendor where
you bought the AT-90SL.
Connectors
Output Jacks
You can connect audio equipment using audio cables (sold
separately) and play the sounds from the AT-90SL through
the speakers on the connected equipment or record your
performances on a tape recorder or other recording device.
If the input of the connected device is monaural, you must
use the L (mono) jack.
fig.
Input Jacks
You can connect another sound module, such as audio
equipment or an electronic instrument using audio cables
(sold separately) and play the sounds from the connected
device through the speakers on the AT-90SL.
If the input of the connected device is monaural, you must
use the L (mono) jack.
fig.
When using the Input jacks to play the sound from an
external device through the speakers of the AT-90SL, you can
apply the internal RSS reverb of the AT-90SL (p. 210).
If the Input switch is set to “RSS,” you can use the AT-90SL’s
[Master Volume] slider to adjust the volume of the external
device.
NOTE
If the Input switch is set to “RSS,” RSS reverb will also be
applied to the sound of the microphone. In this case, use the
[Mic Volume] knob to adjust the microphone volume.
Making the Connections
When connecting, turn on power to your various devices in
the order specified. Failure to follow these steps in the order
given could cause a malfunction and/or damage to speakers
or other equipment.
Playing Sounds from the AT-90SL Through the
Speakers on Audio Equipment or Recording
Your Performances on a Recording Device
1.
Turn the volume all the way down on the AT-
90SL and on the device you’re about to connect.
2.
Turn off the power to the AT-90SL and other
connected equipment.
3.
Use audio cables (sold separately) to make the
connection.
4.
Switch on the AT-90SL.
5.
Switch on the connected device.
6.
Adjust the volume level on the AT-90SL and the
connected device.
Recording AT-90SL Performances on a
Recording Device
7.
Start recording with the connected device.
8.
Play the keyboard of the AT-90SL.
9.
When the performance ends, stop recording on
the connected equipment.
L (mono)
R
Aux
L (mono)
R
Main
Output
L (mono)
R
Input
Normal
RSS
Input switch
position
Effect
Normal
The sound of the external device will be
heard without modification.
RSS
The RSS reverb of the AT-90SL will be
applied to the sound of the external
device.
AT-90SL_e.book 205 ページ 2004年9月8日 水曜日 午後5時44分
Summary of Contents for Atelier AT-90SL
Page 1: ...04 9 3N 03676678...
Page 263: ...262 MEMO AT 90SL_e book 262...
Page 266: ...04 9 3N 03676678...