Roland Atelier AT-90SL, Owner'S Manual

Page: 99 / 266

98
Chapter 3 Using the Registration Buttons
Saving Registration Sets to a Floppy
Disk
With the settings of Registration buttons [1]–[12] considered as one set, a
single floppy disk can store up to 99 sets of data. We recommend that
complex panel settings or Registrations you wish to keep be saved on disk.
Furthermore, when you save registrations created on the AT-90SL to floppy
disks, you can call up their settings on other Atelier Series instruments and
use the registrations the same way.
1.
Make sure that the disk drive contains a disk that was
formatted (p. 96) by the ATELIER.
2.
Touch <Registration> on the Main screen.
The sub-window appears.
fig.03-04_55
3.
Touch <Save>.
The Registration Save screen appears.
fig.03-09_55
When you touch <go to
Load>, the instrument
jumps to the Registration
Load screen.
If you wish to assign a
name before you save, refer
to
“Assigning a Name to a
Registration Set” (p. 94).
Min
Max
Min
Max
Min
Max
Min
Max
Harmony Intelligence
AT-90SL_e.book 98 ページ ２００４年９月８日 水曜日 午後５時４４分