Roland Atelier AT-90SL, Owner'S Manual

Page: 211 / 266

210
Chapter 11 Connecting with External Device
Connecting External
Speakers or an external
Reverb Unit to Broaden the
Reverb
(RSS Reverb)
The AT-90SL has an Aux Out jack on the bottom of the
instrument.
By using this Aux Out jack to connect external speakers, you
can sound the reverb (reverberation) from the speakers. An
external reverb unit can also be connected and used to apply
reverb.
■
Switching the Aux Out On/OFF
1.
Touch <System> on the Main screen.
The System screen appears.
2.
Touch < >< > to display the Aux Out.
3.
Touch the Aux Out setting to switch between
“ON” and “OFF.”
Each time you touch the Aux Out setting, it will alternate
between “ON” and “OFF.”
4.
Touch <Exit>.
■
Switching the Aux Out Mode
1.
Touch <System> on the Main screen.
The System screen appears.
2.
Touch < >< > to display the Aux Out Mode.
3.
Touch the Aux Out Mode setting to switch
between “AMBIENCE” and “TO EFFECTOR.”
Each time you touch the Aux Out Mode setting, it will
alternate between “AMBIENCE” and “TO EFFECTOR.”
4.
Touch <Exit>.
You can change the depth of Reverb for each part (p. 134).
This setting remains stored in memory even while power is
turned off.
Setting
Connected
Device
Effects
AMBIENCE Speaker
The reverb sound applied
by the ATELIER will be
output.
TO
EFFECTOR
Reverb Unit
The direct sound is output
for applying reverb.
Min
Max
Min
Max
Min
Max
Min
Max
Harmony Intelligence
AT-90SL_e.book 210 ページ ２００４年９月８日 水曜日 午後５時４４分