216
Troubleshooting
Lower keyboard cannot be
heard.
The Lower keyboard will not
produce sound while an Intro or
Ending is being played.
This is not a malfunction.
- - -
The sound is not played
correctly.
If you layer the same type of sound
(for example, Strings 1 and Strings
5), or play an octave-shifted organ
sound, the timing at which you play
a note or the phase relationship
between the two sounds may affect
the way in which the sounds are
heard, but this is not a malfunction.
You are layering sounds of the same
type (e.g., Strings 1 and Strings 5).
Alternatively, you are playing an
organ sound with Octave Shift.
This is not a malfunction.
- - -
Can’t play the demo songs.
A floppy disk is inserted in the disk
drive.
In order to play the demo song, you
must remove the floppy disk from
the disk drive.
Nothing appears on screen.
The AT-90SL uses a liquid-crystal
screen, so text may not be displayed
when the ambient temperature is
below freezing.
Adjust the brightness of the screen.
Lyrics are not indicated
properly in the display.
With some music files, the lyrics
cannot be displayed correctly.
This is not a malfunction.
- - -
In the Notation screen, some lyrics or
notes could extend beyond the edges
of the screen, and not be displayed.
This is not a malfunction.
- - -
A button was pressed while the
lyrics were being shown in the
display.
During the display of lyrics, you
could be taken to a different screen if
you press a button.
If you want to have the lyrics be
displayed again, touch <Play> on
the Rec/Play screen.
The Touch Screen doesn’t
respond correctly.
The positioning of the Touch Screen
may become displaced if some time
has passed since it was last used
Reposition the Touch screen.
Certain instrument are not
heard while playing a song.
The track is muted.
Turn off track muting.
Can’t use Chord Intelligence
function.
Chord Intelligence is at OFF.
Turn “Chord Intelligence” on.
Notation is not indicated
properly in the display.
In the Notation screen, some lyrics or
notes could extend beyond the edges
of the screen, and not be displayed.
This is not a malfunction.
- - -
The Notation display feature is
particularly unsuitable for the
display of difficult, complex musical
works that demand accurate
notation.
This is not a malfunction.
If you select a part that does not
contain performance data, notes will
not be displayed in the notation.
Change the part that is displayed.
Vertical lines can be seen in
the screen.
This is attributable to the design
fundamentals of a liquid crystal
display, and does not indicate a
malfunction.
Adjusting the display’s contrast can
make such lines less noticeable, so
you may want to try adjusting it.
Problem
Check
Solution
Page
AT-90SL_e.book 216 ページ ２００４年９月８日 水曜日 午後５時４４分
Summary of Contents for Atelier AT-90SL
Page 1: ...04 9 3N 03676678...
Page 263: ...262 MEMO AT 90SL_e book 262...
Page 266: ...04 9 3N 03676678...
