Roland Atelier AT-90SL Page 85 Owner'S Manual Download

Page: 85 / 266

Chapter 2 Using Rhythm Performance

Touch <

> in the screen to select a rhythm.

Touch <Up> or <Down> to move the rhythm.

Touch <Exit>.

Button

Meaning

Description

Rename

Modify the name

The Rename screen appears. You can
touch the screen and rename the
selected rhythm (p. 85).

Change the order
(upward)

The selected rhythm will be moved
earlier in the order.

Down

Change the order
(downward)

The selected rhythm will be moved
later in the order.

Delete

Delete the Rhythm

The selected rhythm will be deleted
(p. 87).

Min

Max

Min

Max

Min

Max

Min

Max

Harmony Intelligence

AT-90SL_e.book 84 ページ２００４年９月８日　水曜日　午後５時４４分

Summary of Contents for Atelier AT-90SL











































































































































































































































































Search results

Summary of Contents for Atelier AT-90SL

Reviews:

Related manuals for Atelier AT-90SL

Brands by name

Popular brands

Roland Atelier AT-90SL, Owner'S Manual

Search results

Summary of Contents for Atelier AT-90SL

Reviews:

Related manuals for Atelier AT-90SL

Brands by name

Popular brands