Roland Atelier AT-90SL, Owner'S Manual

Page: 164 / 266

163
Chapter 7 Recording/Playing Back What You Play
Using Song with a Different
Tempo Than That of the
Performance Song
1.
Insert the floppy disk containing the performance
song whose tempo you want to change into the
disk drive.
2.
Load the performance data into the unit (p. 160).
3.
Determine the tempo with the Tempo [ ] [ ]
buttons.
4.
Hold down the panel [Reset] button and press the
[Rec] button.
NOTE
You cannot carry out this operation with the <Reset> and
<Rec> in the Rec/Play screen.
Re-Recording Part of Your
Performance
(Punch-in Recording)
After you have recorded a performance, you can re-record a
specified portion of the performance.
With this method, you listen to the recorded performance,
and re-record just the desired area. This recording method is
called “Punch-in Recording.”
To Specify the Segment to be Recorded Over
Again
1.
Touch <Rec/Play> on the Main screen.
The Rec/Play screen appears.
2.
Touch < > (Utility).
The Utility screen appears.
3.
Touch <Punch In/Out>.
The Punch In/Out screen appears.
fig.07-
4.
Touch the “From” value (the measure at which
recording will begin).
fig.07-
5.
Touch < >< > to specify “From” (the
measure at which recording will begin).
6.
Touch the “For” value (the number of measures
that will be re-recorded).
7.
Touch < >< > to set “For” (the number of
measures that will be re-recorded).
8.
Touch <Rec>.
The Rec/Play screen appears, and the unit is placed in
recording standby.
To Record While Listening to the Song
9.
Press the Track button which you wish to re-
record (indicator flashes).
10.
Touch <Play> to begin recording.
When you touch <Play>, the metronome will play two
measures (bars) of count-in before recording begins.
When you reach the first measure of the specified area,
recording will begin. When the specified area ends,
recording will end, and playback will resume.
While the song is playing back or recording, the
Composer [Rec] button’s indicator will be lit as follows.
When recording has ended for the specified area and the
data is once again playing back, the [Rec] button’s
indicator will resume flashing.
11.
Touch <Stop> to stop the recording.
The indicator of the track button which recorded the
performance will light.
While the performance is
playing back
The Composer [Rec]
button’s indicator will
flash
While you are re-
recording
The Composer [Rec]
button’s indicator will
light constantly
Min
Max
Min
Max
Min
Max
Min
Max
Harmony Intelligence
AT-90SL_e.book 163 ページ ２００４年９月８日 水曜日 午後５時４４分